By trade · Doors, Shutters & Openings

12 documents · 3 document sets

Doors, Shutters & Openings.

12 documents for the trade: 3 RAMS, 7 quality inspection checklists, 2 permits to work. Each opens to its own page with the first page shown in full.

Helmet colours vary from site to site. This is a common convention, not a legal standard.

The Doors, Shutters & Openings trade pack

£39the whole page — 12 documents, £124 bought one at a time · ex VAT, added at checkout

Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.

RAMS3

One document per activity rather than one per trade, so what you send describes the work you are actually doing.

£19 each all 220 RAMS for £399 See the bundle

Quality inspection checklists7

Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.

£7 each all 265 quality inspection checklists for £299 See the bundle

Permits to work2

The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.

£9 each all 35 permits to work for £129 See the bundle

What these documents are built on.

Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.

Law

  • HSWA 1974 s.2(2)(a)
  • MHSWR 1999 regs 3 and 5
  • PUWER 1998
  • Work at Height Regulations 2005
  • LOLER 1998 reg 8
  • Manual Handling Operations Regulations 1992
  • COSHH 2002
  • CDM 2015 regs 13 and 15
  • Supply of Machinery (Safety) Regulations 2008
  • PAS 24:2022
  • LPS 1175 (Issue 8)
  • Approved Document B (fire safety), 2019 edition as amended
  • Approved Document M (access to and use of buildings), 2015 edition as amended
  • Approved Document Q (security — dwellings), 2015 edition
  • RRO 2005 — Regulatory Reform (Fire Safety) Order 2005
  • DSEAR 2002 reg 6(8) and Schedule 1 paragraph 6
  • Electricity at Work Regulations 1989 regs 12, 13, 14 and 16, with HSR25

Guidance and standards

  • BS EN 12453:2017+A1:2021
  • BS EN 13241:2003+A2:2016
  • BS EN 16005:2012+A1:2018
  • BS EN 1634-1:2014+A1:2018
  • BS 8214:2016
  • BS 7273-4:2015
  • Joint Code of Practice, Fire Prevention on Construction Sites, 10th edition (2022) incorporating Amendment 2
  • NHS HTM 06-02

Other trades.

Every trade page lists the same four families.

All 48 trades By document type