By trade · Carpentry & Joinery
22 documents · 4 document setsCarpentry & Joinery.
22 documents for the trade: 6 RAMS, 9 quality inspection checklists, 2 permits to work, 5 . Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Carpentry & Joinery trade pack
£79the whole page — 22 documents, £240 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
22 documents in 4 sets.
RAMS6
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists9
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work2
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Topic RAMS5
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- COSHH 2002
- PUWER 1998
- Manual Handling Operations Regulations 1992
- Work at Height Regulations 2005
- LOLER 1998 reg 8
- CDM 2015 regs 13 and 15
- NHBC Standards 2024 Chapters 4 to 7 (6.4 timber upper floors
- 7.2 pitched roofs)
- Approved Document B (fire safety), 2019 edition as amended
- Approved Document K (protection from falling, collision and impact), 2013 edition
- Approved Document M (access to and use of buildings), 2015 edition as amended
- Gas Safety (Installation and Use) Regulations 1998
- NHBC Standards 2024 Chapter 9.1 and 2023 Chapter 9.4
- DSEAR 2002 reg 6(8) and Schedule 1 paragraph 6
- CDM 2015 regs 9 and 13
- COSHH 2002 regs 6, 7, 9 and 11
- RIDDOR 2013 reg 8
- PUWER 1998 regs 4, 5, 6, 9 and 19
- Control of Noise at Work Regulations 2005
- PUWER 1998 regs 4, 5, 9 and 19
- Pressure Systems Safety Regulations 2000
- Personal Protective Equipment at Work Regulations 1992 reg 4
- COSHH 2002 regs 6 and 7
- Environmental Protection Act 1990 s.34
- Waste (England and Wales) Regulations 2011 reg 35
- Hazardous Waste (England and Wales) Regulations 2005
- CDM 2015 regs 13 and 15 and Schedule 2
- Manual Handling Operations Regulations 1992 reg 4
- PUWER 1998 reg 4
- Control of Vibration at Work Regulations 2005
- HSE L140
Guidance and standards
- EH40/2005 (2020) workplace exposure limits — hardwood dust a carcinogen
- BS 5975-1:2024
- BS 8103-3:2009
- BS 8417:2011+A1:2014
- BS 8000-0:2014
- BS 8000-5:1990
- BS 8214:2016
- BS EN 1634-1:2014+A1:2018
- BS 5395-1:2010
- BS 8300-2:2018
- Joint Code of Practice, Fire Prevention on Construction Sites, 10th edition (2022) incorporating Amendment 2
- BS 5975-1:2024 and BS 5975-2:2024
- EH40/2005
- HSE HSG258
- HSE HSG53
- HSE INDG479
- HSE HSG107
Other trades.
This trade's RAMS also have their own page: Carpentry and joinery RAMS template.