By trade · Concrete Cutting, Drilling & Repair
10 documents · 4 document setsConcrete Cutting, Drilling & Repair.
10 documents for the trade: 3 RAMS, 3 quality inspection checklists, 2 permits to work, 2 site inspection records. Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Concrete Cutting, Drilling & Repair trade pack
£49the whole page — 10 documents, £116 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
10 documents in 4 sets.
RAMS3
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists3
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work2
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Site inspection records2
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
£10 each all 41 site inspection records for £69 See the bundle
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- COSHH 2002
- CAR 2012
- PUWER 1998
- LOLER 1998 reg 8
- Electricity at Work Regulations 1989
- Work at Height Regulations 2005
- Manual Handling Operations Regulations 1992
- CDM 2015 regs 13 and 15
- Building Regulations 2010 reg 7(1)
- CDM 2015 regs 9 and 13
- DSEAR 2002 reg 6(8) and Schedule 1 paragraph 6
- Control of Vibration at Work Regulations 2005 regs 5 and 6
- Control of Noise at Work Regulations 2005 regs 5, 6 and 7
Guidance and standards
- BS 5975-1:2024
- EH40/2005 (4th edition, 2020)
- BS EN 1504-10:2017
- BS 8539:2012
- BS 5975-1:2024 and BS 5975-2:2024
- Joint Code of Practice, Fire Prevention on Construction Sites, 10th edition (2022) incorporating Amendment 2
Other trades.
Every trade page lists the same four families.