By trade · Concrete & Formwork
21 documents · 4 document setsConcrete & Formwork.
21 documents for the trade: 6 RAMS, 7 quality inspection checklists, 3 permits to work, 5 . Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Concrete & Formwork trade pack
£79the whole page — 21 documents, £235 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
21 documents in 4 sets.
RAMS6
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists7
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work3
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Topic RAMS5
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- falsework design)
- COSHH 2002
- Manual Handling Operations Regulations 1992
- PUWER 1998
- the delivery ticket)
- making and curing cubes)
- CDM 2015 reg 19
- CDM 2015 regs 9 and 13
- LOLER 1998 reg 8
- MHSWR 1999 reg 5(1), recorded under reg 5(2) where five or more are employed
- basic / intermediate / complex lift classification)
- CDM 2015 regs 13 and 15
- DSEAR 2002
- Work at Height Regulations 2005
- PUWER 1998 regs 4, 5, 6 and 9
- COSHH 2002 (wet concrete
- mould release agent)
Guidance and standards
- BS 5975-1:2024 and BS 5975-2:2024 (temporary works management
- BS EN 13670:2009
- BS 8500-1:2023 and BS 8500-2:2023 (specifying concrete
- BS EN 12350-2:2019 and BS EN 12390-2:2019 (slump test
- BS 8666:2020
- BS 7973-1:2001 and BS 7973-2:2001
- BS 5975-1:2024 and BS 5975-2:2024
- BS 7121-1:2016 (Appointed Person
- HSE GS6 (4th edition, 2013)
- BS 5975-1:2024 and BS 5975-2:2024 (temporary works management procedures
- EH40/2005 (4th edition, 2020)
- HSE HSG144 (2nd edition, 2009)
- BS EN 12350-2:2019 and BS EN 12390-2:2019
Other trades.
This trade's RAMS also have their own page: Concrete and formwork RAMS template.