By trade · Electrical
41 documents · 5 document setsElectrical.
41 documents for the trade: 10 RAMS, 19 quality inspection checklists, 7 permits to work, 1 site inspection records, 4 . Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Electrical trade pack
£129the whole page — 41 documents, £432 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
41 documents in 5 sets.
RAMS10
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists19
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work7
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Site inspection records1
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
£10 each all 41 site inspection records for £69 See the bundle
Topic RAMS4
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- Electricity at Work Regulations 1989 regs 4(3), 12–14 and 16
- Electricity at Work Regulations 1989 reg 4(3)
- Manual Handling Operations Regulations 1992
- CDM 2015 regs 13 and 15
- Work at Height Regulations 2005
- CIBSE Commissioning Codes (C automatic controls
- M commissioning management)
- Building Regulations 2010 (commissioning of fixed building services) and Approved Document L
- CIBSE Commissioning Codes (M commissioning management
- A air distribution
- W water distribution
- C automatic controls)
- BSRIA BG 49/2015 — Commissioning Air Systems
- BSRIA BG 2/2010 — Commissioning Water Systems
- BSRIA BG 29/2021 — Pre-Commission Cleaning of Pipework Systems
- EAWR 1989 — Electricity at Work Regulations 1989
- IET Guidance Note 3 — Inspection and Testing
- ENA G98/G99
- IET Code of Practice for Electric Vehicle Charging Equipment Installation
- Building Regulations 2010 and Approved Document B (2019 edition, as amended) — fire safety
- Part 8 smoke control dampers)
- Electricity at Work Regulations 1989 regs 12, 13, 14 and 16, with HSR25
- PUWER 1998 reg 19
- Electricity at Work Regulations 1989 regs 4, 12 and 13
- Electricity at Work Regulations 1989 regs 14 and 16
- Regulatory Reform (Fire Safety) Order 2005 arts 13 and 17
- Electricity at Work Regulations 1989 reg 14
- Electricity at Work Regulations 1989 regs 4 and 16
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- Electricity at Work Regulations 1989 regs 4, 12, 13, 14 and 16, with HSR25
- Personal Protective Equipment at Work Regulations 1992
- Electricity at Work Regulations 1989 reg 4, and reg 14 where a damaged live cable is found
- PUWER 1998
- LOLER 1998
- Electricity at Work Regulations 1989 regs 4, 12, 13, 14 and 16
Guidance and standards
- HSG85 and HSR25
- BS 7671:2018+A4:2026
- HSE GS38 (4th edition, 2015)
- HSG85
- BS 6701:2016+A1:2017 with BS 7671:2018+A4:2026
- BS 8519:2020
- BS 5839-1:2025
- BS 7671:2018+A4:2026 Section 704 with BS 7375:2010 and HSG141
- HSE HSG33 (5th edition, 2020)
- BS EN 12599:2012
- BS 7273-4:2015
- BS 7346-8:2013
- BS 5266-1:2016
- GS38 (4th edition, 2015) — electrical test equipment for use on low voltage electrical systems
- HTM 05-03 Part B (2007) — fire detection and alarm systems in healthcare premises
- BS 6701
- BS EN 50174-2:2018
- BS EN 62305-3:2011
- BS EN 62446-1:2016
- BS EN 12845:2015+A1:2019
- BS 9251:2021
- BS 9990:2015
- BS EN 12101 (smoke and heat control systems — Part 2 natural smoke and heat exhaust ventilators
- BS 8524-2:2013
- BS EN 15004-1:2019
- BS EN 16282-7
- NHS HTM 06-02
- HSE HSG250
- BS 7671:2018+A4:2026 Part 6
- HTM 05-03
- GS6
- BS 7375:2010
- HSG141
- GS38
Other trades.
This trade's RAMS also have their own page: Electrical RAMS template.