By trade · Structural Steel & Metalwork
18 documents · 4 document setsStructural Steel & Metalwork.
18 documents for the trade: 5 RAMS, 7 quality inspection checklists, 4 permits to work, 2 site inspection records. Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Structural Steel & Metalwork trade pack
£89the whole page — 18 documents, £200 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
18 documents in 4 sets.
RAMS5
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists7
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work4
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Site inspection records2
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
£10 each all 41 site inspection records for £69 See the bundle
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- Work at Height Regulations 2005
- LOLER 1998 reg 8
- PUWER 1998
- COSHH 2002
- CDM 2015 regs 13 and 15
- Building Regulations 2010 Approved Document K (protection from falling, collision and impact) and reg 7(1)
- execution of steel structures)
- NSSS (7th edition)
- welding procedure test)
- DSEAR 2002 reg 6(8) and Schedule 1 paragraph 6
- Work at Height Regulations 2005 reg 4
- MHSWR 1999 reg 5(1), recorded under reg 5(2) where five or more are employed
- basic / intermediate / complex lift classification)
- CDM 2015 reg 19
- LOLER 1998 regs 8, 9 and 11
- Work at Height Regulations 2005 reg 12
Guidance and standards
- BS 7121-1:2016
- BS 5975-1:2024
- BS 6180:2011
- BS EN 1991-1-1:2002 and its UK National Annex
- BS 8539:2012
- BS EN 1090-1:2009+A1:2011 and BS EN 1090-2:2018 (conformity assessment
- BS EN ISO 9606-1:2017 and BS EN ISO 15614-1:2017+A1:2019 (welder qualification
- BS EN ISO 14555:2017
- Joint Code of Practice, Fire Prevention on Construction Sites, 10th edition (2022) incorporating Amendment 2
- BS 7121-1:2016 (Appointed Person
- HSE GS6 (4th edition, 2013)
- BS 5975-1:2024 and BS 5975-2:2024
- BS EN 365:2004
Other trades.
This trade's RAMS also have their own page: Structural steel RAMS template.