By trade · Fitted Furniture & Equipment
11 documents · 2 document setsFitted Furniture & Equipment.
11 documents for the trade: 4 RAMS, 7 quality inspection checklists. Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Fitted Furniture & Equipment trade pack
£49the whole page — 11 documents, £125 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
11 documents in 2 sets.
RAMS4
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists7
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- COSHH 2002
- Gas Safety (Installation and Use) Regulations 1998
- Electricity at Work Regulations 1989
- PUWER 1998
- Manual Handling Operations Regulations 1992
- Work at Height Regulations 2005
- CDM 2015 regs 13 and 15
- Health and Safety (Safety Signs and Signals) Regulations 1996
- Building Regulations 2010
- Approved Document K (protection from falling, collision and impact), 2013 edition
- Approved Document M (access to and use of buildings), 2015 edition as amended
- NHBC Standards 2024 Chapter 9.1 and 2023 Chapter 9.4
Guidance and standards
- EH40/2005 (4th edition, 2020) — respirable crystalline silica from engineered stone
- BS 8000-5:1990
- BS 8300-2:2018
- BS EN 13120:2009+A1:2014
- BS EN 15635:2008
- BS EN ISO 7010:2020
- BS 7176:2007+A1:2011
Other trades.
Every trade page lists the same four families.