By trade · Scaffolding & Access
23 documents · 5 document setsScaffolding & Access.
23 documents for the trade: 7 RAMS, 4 quality inspection checklists, 3 permits to work, 4 site inspection records, 5 . Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Scaffolding & Access trade pack
£89the whole page — 23 documents, £273 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
23 documents in 5 sets.
RAMS7
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists4
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work3
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Site inspection records4
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
£10 each all 41 site inspection records for £69 See the bundle
Topic RAMS5
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- Work at Height Regulations 2005 — Schedule 3 (working platforms), Part 2 scaffolding, reg 12 and Schedule 7
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- Manual Handling Operations Regulations 1992
- COSHH 2002
- CDM 2015
- Work at Height Regulations 2005 regs 6, 8(c) and 12, and Schedule 4
- WAHR 2005 — Work at Height Regulations 2005
- LOLER 1998 — Lifting Operations and Lifting Equipment Regulations 1998
- PUWER 1998 — Provision and Use of Work Equipment Regulations 1998
- preventing falls in scaffolding)
- PASMA code of practice
- Work at Height Regulations 2005 reg 4
- CDM 2015 reg 19
- Electricity at Work Regulations 1989 reg 14
- Work at Height Regulations 2005 reg 12 and Schedule 7
- Work at Height Regulations 2005 reg 6(3) and Schedule 6, reg 12
- LA455
- Work at Height Regulations 2005 reg 12
- PASMA
- Work at Height Regulations 2005 — Schedule 3 Part 2 (scaffolding), reg 12 and Schedule 7
- CDM 2015 regs 13 and 15
- HSE RR708
- Health and Safety (First-Aid) Regulations 1981 reg 3
- RIDDOR 2013
- MHSWR 1999 regs 3, 5 and 8
- LOLER 1998 reg 8
Guidance and standards
- NASC TG20:21 and TG30:24
- NASC SG4:22
- BS EN 1263-1:2014
- BS EN 1263-2:2014
- BS 8411:2019
- NASC TG20:21 and SG4:22 (tube-and-fitting scaffold design and compliance sheets
- BS EN 365:2004
- BS 7985:2013
- BS 7121-1:2016
- BS 7212:2016
- BS 5975-1:2024 and BS 5975-2:2024
- GS6
- NASC TG20:21 and SG4:22
- BS 8539:2012
- BS 5975-1:2024
- HSE INDG401
- NASC TG20:21, TG30:24 and SG4:22
Other trades.
This trade's RAMS also have their own page: Scaffolding RAMS template.