By trade · Plant & Lifting
24 documents · 5 document setsPlant & Lifting.
24 documents for the trade: 9 RAMS, 4 quality inspection checklists, 3 permits to work, 3 site inspection records, 5 . Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Plant & Lifting trade pack
£79the whole page — 24 documents, £301 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
24 documents in 5 sets.
RAMS9
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists4
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work3
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
Site inspection records3
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
£10 each all 41 site inspection records for £69 See the bundle
Topic RAMS5
The registers this trade keeps or feeds. Fillable, dated, and yours to keep.
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- PUWER 1998
- LOLER 1998 regs 8 and 9
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- Work at Height Regulations 2005
- COSHH 2002
- CDM 2015 regs 13 and 15
- CDM 2015 reg 25(2) and (3)
- Electricity at Work Regulations 1989 reg 14
- LOLER 1998 reg 8
- RIDDOR 2013 Schedule 2
- CDM 2015 reg 19
- CDM 2015 regs 27 and 28 (traffic routes
- vehicles)
- PUWER 1998 regs 25 and 26 (people carried
- rolling over)
- PUWER 1998 reg 26
- CDM 2015 reg 25(4)
- WAHR 2005 — Work at Height Regulations 2005
- LOLER 1998 — Lifting Operations and Lifting Equipment Regulations 1998
- PUWER 1998 — Provision and Use of Work Equipment Regulations 1998
- preventing falls in scaffolding)
- PASMA code of practice
- MHSWR 1999 reg 5(1), recorded under reg 5(2) where five or more are employed
- basic / intermediate / complex lift classification)
- LOLER 1998 regs 8, 9 and 11
- PUWER 1998 regs 5 and 6
- LOLER 1998 reg 9
- Control of Vibration at Work Regulations 2005 regs 5 and 6
- PUWER 1998 regs 4 and 9
- The Health and Safety (Safety Signs and Signals) Regulations 1996
- BRE BR 470 (2004)
- CDM 2015 regs 13, 15 and 25(4)
- Work at Height Regulations 2005 reg 4
- HSE GEIS6
- HSE RR708
- PUWER 1998 reg 9
- Health and Safety (First-Aid) Regulations 1981 reg 3
- PUWER 1998 regs 5, 6 and 9
- Manual Handling Operations Regulations 1992 reg 4
Guidance and standards
- BS 8460:2025
- BS 7121-1:2016
- HSE GS6
- BS 7121-1:2016 and BS 7121-5:2019
- BS 5975-1:2024
- HSE HSG144
- HSE HSG47
- NASC TG20:21 and SG4:22 (tube-and-fitting scaffold design and compliance sheets
- BS EN 365:2004
- BS 7985:2013
- BS 7212:2016
- BS 7121-1:2016 (Appointed Person
- HSE GS6 (4th edition, 2013)
- GS6
- BS 5975-1:2024 and BS 5975-2:2024
- BS 7121-3:2017
- HSE INDG401
Other trades.
This trade's RAMS also have their own page: Plant and lifting RAMS template.