By trade · Partitions & Internal Screens
6 documents · 3 document setsPartitions & Internal Screens.
6 documents for the trade: 3 RAMS, 2 quality inspection checklists, 1 permits to work. Each opens to its own page with the first page shown in full.
Helmet colours vary from site to site. This is a common convention, not a legal standard.
The Partitions & Internal Screens trade pack
£29the whole page — 6 documents, £80 bought one at a time · ex VAT, added at checkout
Tick the box above first.
Every document in this pack is approved for issue by its author — a director of a UK principal contractor, forty years in the industry, SMSTS. None has been independently reviewed, and each says so. Every future revision is free. Why we don’t say “compliant”.
On this page
6 documents in 3 sets.
RAMS3
One document per activity rather than one per trade, so what you send describes the work you are actually doing.
£19 each all 220 RAMS for £399 See the bundle
Quality inspection checklists2
Walked and ticked on site, one sheet per area. Hold points where the work gets covered up; one named reviewer releases them; the client signs once at the end.
£7 each all 265 quality inspection checklists for £299 See the bundle
Permits to work1
The permits this trade works under. Issued by whoever runs the site — if that is you, the full suite has the registers and appointments that go with them.
£9 each all 35 permits to work for £129 See the bundle
What these documents are built on.
Every instrument below is in the legislation register with the date it was checked. The documents print the clause they rely on.
Law
- HSWA 1974 s.2(2)(a)
- MHSWR 1999 regs 3 and 5
- Work at Height Regulations 2005
- Manual Handling Operations Regulations 1992
- PUWER 1998
- COSHH 2002
- CDM 2015 regs 13 and 15
- Approved Document B (fire safety), 2019 edition as amended
- Approved Document E (resistance to the passage of sound), 2003 edition as amended
- Approved Document K (protection from falling, collision and impact), 2013 edition
- CDM 2015 regs 9 and 13
Guidance and standards
- EH40/2005 (4th edition, 2020)
- BS 5234-1:1992 and BS 5234-2:1992
- BS 8212:1995
- BS EN 520:2004+A1:2009
- BS EN 1364-1:2015
- BS EN 1366-3:2021 and BS EN 1366-4:2021
- BS 9999:2017
- BS EN ISO 16283-1:2014
- BS 5975-1:2024 and BS 5975-2:2024
Other trades.
Every trade page lists the same four families.