Provisions the documents cite: H1 foul drainage — bedding, cover, testing (air test 100 mm water gauge for 5 minutes, not falling below 75 mm; water test); H3 rainwater drainage
What it requires
The statutory guidance for below-ground drainage in England: pipe cover and bedding, and the air and water test figures every drainage tester uses.
How this entry is kept current
- Citation status: carried from drafting; a source check is in the monthly scan queue.
- Watched by: manual check each scan for a new edition.
- Automated scan: no public page to watch; checked by hand in the monthly review.
Every source is re-checked monthly and the result is published in the scan log. A change that alters what a document should say raises a revision, and past buyers of that document are told.
The 25 documents that cite it
Every KubitDocs document prints its statutory basis on the form itself, so the person signing can verify the citation rather than take our word for it.
Groundworks and civils quality checklists
- Backfill and Compaction — Quality Inspection Checklist
- Below-Ground Drainage — Quality Inspection Checklist
- Below-Ground Services and Ducts — Quality Inspection Checklist
- Drainage Testing and CCTV — Quality Inspection Checklist
- Excavation and Formation — Quality Inspection Checklist
- Foundations — Trench and Pad — Quality Inspection Checklist
- Ground Gas and Radon Protection — Membrane, Venting and Verification — Quality Inspection Checklist
- Ground-Floor Slab and DPM — Quality Inspection Checklist
- Interceptors, Separators, Pumping Stations and Below-Ground Tanks — Quality Inspection Checklist
- Manholes and Inspection Chambers — Bases, Benching, Rings, Steps and Covers — Quality Inspection Checklist
- Setting Out and Levels — Quality Inspection Checklist
- SuDS — Attenuation Tanks, Crates, Soakaways and Permeable Sub-Base — Quality Inspection Checklist
Inspection and test plans
Mechanical services quality checklists
- Cold Rooms, Catering and Specialist Plant — Quality Inspection Checklist
- Commissioning and Balancing — Witness — Quality Inspection Checklist
- Ductwork Cleanliness and Leakage Testing — Quality Inspection Checklist
- Ductwork — Supports, Joints, Fire Dampers and Access — Quality Inspection Checklist
- Gas Installation — Tightness, Purge and Commissioning — Quality Inspection Checklist
- Insulation, Vapour Seal and Identification — Quality Inspection Checklist
- Pipework First Fix — Routes, Supports, Sleeves and Identification — Quality Inspection Checklist
- Plant Installation — Bases, Vibration Isolation and Connections — Quality Inspection Checklist
- Pressure Testing — Water, Heating and Gas-Free Systems — Quality Inspection Checklist
- Sanitaryware and Second Fix — Quality Inspection Checklist
- Underfloor Heating — Loops and Pressure Test — Quality Inspection Checklist
- Water Hygiene — Flushing, Chlorination and L8 Records — Quality Inspection Checklist